How to display wired clients on an Apple AirPort Time Capsule

Version 6.x of Apple’s AirPort Utility displays all your wireless client’s IP addresses, but it doesn’t show you wired devices. The old version 5.6 did, but without a hack it no longer runs on Mountain Lion.

There is however a simple way to display all clients using the command line tool arp. Open up a Terminal Window (Applications – Utilities – Terminal) and type the following:

It’s not pretty, but it gives you a good idea of what’s attached, and which IP addresses to try. You can also compare your wireless devices to this list and see which one is the “odd one out”.

To display your wireless device IPs, open AirPort Utility, then option-double-click onto your AirPort model/icon and a window opens up. Each device has “friendly name” and a small triangle that will display its IP and MAC address:

Screen Shot 2014-02-05 at 13.06.38

About Jay Versluis

Jay is a medical miracle known as a Super Survivor. He runs two YouTube channels, five websites and several podcast feeds. To see what else he's up to, and to support him on his mission to make the world a better place, check out his Patreon Campaign.

1 thought on “How to display wired clients on an Apple AirPort Time Capsule

  1. arp -a only lists devices that computer or device has seen since it started.

    If you are running it from a mac on a switched network, it will only see what has connected to that mac. You would need to be able to run arp from the time capsule itself to see what has connected to it.

Leave a Reply to jason alexander Cancel reply